Equipment is designed for the continual vulcanization of products from technical rubber as are rubber belts, roof covering, rubber belts with textile inserts, sealing plates, membrane and ship textile, conveyor belts, flat belts, floor covering etc. Each processed material as well as applied technology reguire special line setup, especially input and output part.
Line consist of following machines:
- winding off equipment
- rotocure
- cooling equipment
- equipment fo edge trimming of product
- winding up equipment
Basic machine of vulcanizing line is always rotocure. From winding off, the semiproduct is led on the lower roll and from there into pressing space between the heating drum and thrust pressing belt where is pressed and vulcanized.
Type of machine |
| 14480 | 03821 |
---|---|---|---|
max. diameter of wound off/wound up semiproduct (diameter of roller) | mm | *800 (120) | |
dimension of the chucking square | mm | *35x35 | *30x30 |
diameter of heating drum of press | mm | 1000 | 1250 |
working width of press drums | mm | 1700 | 1800 |
width of thrust steel belt of press | mm | 1600 | 1560 |
maximal width of semiproduct | mm | 1500 | 1500 |
maximal thickness of semiproduct | mm | 10 | 5 |
length of pressure vulcanizing zone | mm | 2012 | 2650 |
working speed of line (peripheral speed of heating drum) | m/hour | 3,7-90 | 7-100 |
Remark: * according to the customer requirements |
|
|
|